Journal tags: backend

2

sparkline

Indy web

It was Indie Web Camp Brighton on the weekend. After a day of thought-provoking discussions, I thoroughly enjoyed spending the second day tinkering on my website.

For a while now, I’ve wanted to add maps to my monthly archive pages (to accompany the calendar heatmaps I added at a previous Indie Web Camp). Whenever I post anything to my site—a blog post, a note, a link—it’s timestamped and geotagged. I thought it would be fun to expose that in a glanceable way. A map seems like the right medium for that, but I wanted to avoid the obvious route of dropping a load of pins on a map. Instead I was looking for something more like the maps in Indiana Jones films—a line drawn from place to place to show the movement over time.

I talked to Aaron about this and his advice was that a client-side JavaScript embedded map would be the easiest option. But that seemed like overkill to me. This map didn’t need to be pannable or zoomable; just glanceable. So I decided to see if how far I could get with a static map. I timeboxed two hours for it.

After two hours, I admitted defeat.

I was able to find the kind of static maps I wanted from Mapbox—I’m already using them for my check-ins. I could even add a polyline, which is exactly what I wanted. But instead of passing latitude and longitude co-ordinates for the points on the polyline, the docs explain that I needed to provide …cur ominous thunder and lightning… The Encoded Polyline Algorithm Format.

Go to that link. I’ll wait.

Did you read through the eleven steps of instructions? Did you also think it was a piss take?

  1. Take the initial signed value.
  2. Multiply it by 1e5.
  3. Convert that decimal value to binary.
  4. Left-shift the binary value one bit.
  5. If the original decimal value is negative, invert this encoding.
  6. Break the binary value out into 5-bit chunks.
  7. Place the 5-bit chunks into reverse order.
  8. OR each value with 0x20 if another bit chunk follows.
  9. Convert each value to decimal.
  10. Add 63 to each value.
  11. Convert each value to its ASCII equivalent.

This was way beyond my brain’s pay grade. But surely someone else had written the code I needed? I did some Duck Duck Going and found a piece of PHP code to do the encoding. It didn’t work. I Ducked Ducked and Went some more. I found a different piece of PHP code. That didn’t work either.

At this point, my allotted time was up. If I wanted to have something to demo by the end of the day, I needed to switch gears. So I did.

I used Leaflet.js to create the maps I wanted using client-side JavaScript. Here’s the JavaScript code I wrote.

It waits until the page has finished loading, then it searches for any instances of the h-geo microformat (a way of encoding latitude and longitude coordinates in HTML). If there are three or more, it generates a script element to pull in the Leaflet library, and a corresponding style element. Then it draws the map with the polyline on it. I ended up using Stamen’s beautiful watercolour map tiles.

Had some fun at Indie Web Camp Brighton on the weekend messing around with @Stamen’s lovely watercolour map tiles. (I was trying to create Indiana Jones style travel maps for my site …a different kind of Indy web.)

That’s what I demoed at the end of the day.

But I wasn’t happy with it.

Sure, it looked good, but displaying the map required requests for a script, a style sheet, and multiple map tiles. I made sure that it didn’t hold up the loading of the rest of the page, but it still felt wasteful.

So after Indie Web Camp, I went back to investigate static maps again. This time I did finally manage to find some PHP code for encoding lat/lon coordinates into a polyline that worked. Finally I was able to construct URLs for a static map image that displays a line connecting multiple points with a line.

I’ve put this maps on any of the archive pages that also have calendar heat maps. Some examples:

If you go back much further than that, the maps start to trail off. That’s because I wasn’t geotagging everything from the start.

I’m pretty happy with the final results. It’s certainly far more responsible from a performance point of view. Oh, and I’ve also got the maps inside a picture element so that I can swap out the tiles if you switch to dark mode.

It’s a shame that I can’t use the lovely Stamen watercolour tiles for these static maps though.

Frustration

I had some problems with my bouzouki recently. Now, I know my bouzouki pretty well. I can navigate the strings and frets to make music. But this was a problem with the pickup under the saddle of the bouzouki’s bridge. So it wasn’t so much a musical problem as it was an electronics problem. I know nothing about electronics.

I found it incredibly frustrating. Not only did I have no idea how to fix the problem, but I also had no idea of the scope of the problem. Would it take five minutes or five days? Who knows? Not me.

My solution to a problem like this is to pay someone else to fix it. Even then I have to go through the process of having the problem explained to me by someone who understands and cares about electronics much more than me. I nod my head and try my best to look like I’m taking it all in, even though the truth is I have no particular desire to get to grips with the inner workings of pickups—I just want to make some music.

That feeling of frustration I get from having wiring issues with a musical instrument is the same feeling I get whenever something goes awry with my web server. I know just enough about servers to be dangerous. When something goes wrong, I feel very out of my depth, and again, I have no idea how long it will take the fix the problem: minutes, hours, days, or weeks.

I had a very bad day yesterday. I wanted to make a small change to the Clearleft website—one extra line of CSS. But the build process for the website is quite convoluted (and clever), automatically pulling in components from the site’s pattern library. Something somewhere in the pipeline went wrong—I still haven’t figured out what—and for a while there, the Clearleft website was down, thanks to me. (Luckily for me, Danielle saved the day …again. I’d be lost without her.)

I was feeling pretty down after that stressful day. I felt like an idiot for not knowing or understanding the wiring beneath the site.

But, on the other hand, considering I was only trying to edit a little bit of CSS, maybe the problem didn’t lie entirely with me.

There’s a principle underlying the architecture of the World Wide Web called The Rule of Least Power. It somewhat counterintuitively states that you should:

choose the least powerful language suitable for a given purpose.

Perhaps, given the relative simplicity of the task I was trying to accomplish, the plumbing was over-engineered. That complexity wouldn’t matter if I could circumvent it, but without the build process, there’s no way to change the markup, CSS, or JavaScript for the site.

Still, most of the time, the build process isn’t a hindrance, it’s a help: concatenation, minification, linting and all that good stuff. Most of my frustration when something in the wiring goes wrong is because of how it makes me feel …just like with the pickup in my bouzouki, or the server powering my website. It’s not just that I find this stuff hard, but that I also feel like it’s stuff I’m supposed to know, rather than stuff I want to know.

On that note…

Last week, Paul wrote about getting to grips with JavaScript. On the very same day, Brad wrote about his struggle to learn React.

I think it’s really, really, really great when people share their frustrations and struggles like this. It’s very reassuring for anyone else out there who’s feeling similarly frustrated who’s worried that the problem lies with them. Also, this kind of confessional feedback is absolute gold dust for anyone looking to write explanations or documentation for JavaScript or React while battling the curse of knowledge. As Paul says:

The challenge now is to remember the pain and anguish I endured, and bare that in mind when helping others find their own path through the knotted weeds of JavaScript.